Product specification, functions and appearance may vary by models and differ from country to country. I could help you if you like but I would have to pull out my directions Try Danny’s setup , if it does not work post back and I will try and help Good Luck Dave. Do you have a thermometer analog or digital that you could use to measure your case temp? D try to find better hehe its always like 5cfm max I haven’t used it, but several guys around here have recommended it as an alternative to MBM5. Look I am not trying to start a war , I am only trying to explain that the naming structure that MSI is very confusing to say the least. Another possibility is that the BIOS messed up your case temp and that it’s reading a higher case temp than you actually have
|Date Added:||26 April 2016|
|File Size:||57.81 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Does it Blue Screen?
Neo-lsrr/ you have another you can swap in just to see? Any rights not expressly granted herein are reserved. Products may not be available in all markets.
Download MSI P Neo-LSR/ FIS2R Intel USB Driver for Windows 9X, Windows ME
D i always use the bios Probably the first thing I would recommend this is off topic is to try and lower your case temps Oh BTW, another reason I’m probably going to stay with my stock NB cooler is that I have to replace the transmission in my Jeep, which is looking to be totaling over dollars If will boot into Windows, I would recommend running Prime 95 http: If you can run Prime’s Torture test go to Options, select Torture Test and choose In-Place the middle choice for about 6 hrs it’s considered stable enough to increase the oc.
P but its pretty good Well, your load temp doesn’t sound bad at all for your setup, but the idle temp is definitely out of whack.
Windows won’t have a lower temp than BIOS, so there’s something strange going on. D I never push my 3,0C over than fsb but i got alot of crap.
MSI P Neo-FIS2R – motherboard – ATX – Socket – iP Overview – CNET
D i tried the same test with only 1 prime95 but i got an error after 1h If you click the link to it in my sig, you can find out more about it You should be able to run Prime for 12 to 24 hours with no problems before you can consider your overclock stable. D i already change again my capacitor.
Do you have a thermometer analog or digital that you could use to measure your case temp? I have the Antec TrueControl so I can vary my rails if need be.
875P Neo / 875P NEO-LSR / 875P NEO-FIS2R (MS-6758)
Hey Welcome to the Forums!!! Have you tried doing a search to see if there are any bugs with the new Intel driver? Adobe product box shots reprinted with permission from Adobe Systems Incorporated. D so its hard to know I myself sometimes think it is fiz2r “HYPE” I would like to buy better memory but I neo-lsr afraid I would just spend a lot of money and only end up with the same results I have now. That’s what I consider stable. I don’t know what to tell you on that one D i did a 80mm hole in front of my vid card and i change my 80mm hole in front of my cpu to a mm: Have you tried raising your vcore any higher than that to see if it helps, it could be that under load the vcore is getting too low and then your oc becomes unstable.
I know absolutely zip about RAID I can’t think of too much else, but I’m probably forgetting something I haven’t tried it lately, maybe they fixed all of the bugs that I had problems with. P i need to much thing for my money now There are two ways I don’t see why you would need fsi2r much faster loading time if you have a 10k rpm drive though, the Raptors are plenty fast already: You can’t beat it for the amount of info you get in a few seconds.
Hey, congrats on the great overclock: I could help you if you like but I would have to pull out my directions Try Danny’s setupif it does not work post back and I will try and help Good Luck Dave.