You can install memory modules in any combination as follows: Page 25 Chapter 2 Front Microphone Connector: Reacondicionado por el fabricante. You can barely see the golden finger if the module is deeply inserted in the socket. It introduces a 66MHz, bit channel for the graphics controller to directly access main memory and provides three levels of throughputs: I was surprised to find one in excellent condition and with a guarantee to work.

Uploader: Shaktigrel
Date Added: 14 November 2012
File Size: 10.24 Mb
Operating Systems: Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X
Downloads: 59500
Price: Free* [*Free Regsitration Required]

Onboard Peripherals h Onboard peripherals include: For more information on Hyper-threading Technology, go to: Connect the fan power cable from the mounted fan to the 3-pin fan power connector on the board.

MS Motherboard The motherboard replaced an existing defective motherboard without any problems. JSP1 This connector is used to connect the internal speaker if available. Northwood processors in pin package, the MS delivers a high per.

Refund can be accepted in 90 days after you signed the package.

MSi MS-6577 Getting Started

We’ll resend another mobo to you, as soon as we got the returned package. But if you don’t satisfy with the item, or you have any concern about our transaction, please do first contact us, we will response you in 24 hours, and do 5677 best to help you solve any problems. You must be happy to do business with us. Mic is a connector for microphones.


MSI MS v Gamila2 motherboard Skt DDR1 Intel GV % working | eBay

Removal and replacement were easy and all components functioned properly. Designed to fit the advanced Intel.

Thank you for purchasing the Uzb v2. Well, it did not work for me. Refer to the hard disk documentation supplied by hard disk vendors for jumper setting instructions. We will provide you the best service and high quality products. For some components, if you install in the wrong orientation, the components will not work properly. Position the heatsink onto the reten- mechanism on the motherboard.

Please send back the item in original package, needn’t return any accessories. Hardware Setup Hardware Setup This chapter provides you with the information about hardware setup procedures.

Make sure to raise the lever up to a degree angle. The module will only fit in the right orientation. Please turn off the power and unplug the power cord before installing the CPU.

Inicio de ventana Agregar a lista. Please note if you order wrong, we don’t accept the refund or replace. Please note that any violation of the correct installation procedures may cause permanent damages to your mainboard. Press the two levers down to fasten Press down the fan until its four clips get wedged in the holes of the retention mechanism. Chapter 2 Installing the CPU Fan As processor technology m to faster speeds and higher performance, thermal management becomes increasingly important.


I am now able to retrieve and save all of my pictures and important documents that would have cost much more to have retrieved elsewhere. Locate the CPU ush its retention Position the heatsink onto the reten- mechanism on the motherboard.

Mic is a connector for microphones. If you install two hard disks on cable, you must configure the second drive to Slave mode by setting its jumper.

Save on Motherboards Trending price is based on prices over last 90 days.

MS | Msi MS S FSB P4 Motherboard

Mw Started Chapter 1. To attach the fiber-optic cable to optical SPDIF jack, you need to remove the plug from the jack first. Additional Product Features Product Type.